|
Home / Cars and Trucks / Motorcycles
Get To Know Your Mini Moto - Part IIII
By:Matt Tong
In the last part of the Get To Know Your Mini Moto series, I will explain how further components of the mini moto contribute to this great little machines.
Throttle
The throttle on your new mini moto is a 'twist grip' style throttle. When you twist the throttle the throttle cable is pulled back revving the engine. It is important to keep this cable free from obstacles and clean. If the throttle begins to feel 'loose' of 'gives', the tension of the cable can be adjusted via the adjusting screw.
Brakes
The brake system comprises of brake levers, brake cables, brake calipers and brake discs.
The brakes on your mini moto are operated by levers found on the handle bars. The right hand brake controls the front brake, and the left controls the back brake. Pulling on the handle pulls the brake cable which in turn pulls the lever located on the bake caliper. This action pushes the brake discs towards each other. This creates friction on the brake disc which slows down or stops the bike.
The brakes can be adjusted in the following ways.
The brake cable can be tensioned using the adjustment screw found on the brake lever. Unscrew the locking nut; twist the screw to reach the desired tension. Re screw the locking nut.
This is a two person job. Adjust the screw on the hand brake so that is at the end of its travel. Undo the clamp that holds the brake cable on the lever located on the brake caliper. One person needs to push the lever forward as far as it will, the second person needs to pull back on the brake cable and re fasten the clamp. The crake cable will now be highly tensioned.
Pull Start
To start the mini moto pull slowly to turn the fly wheel. This pumps some fuel around the engine, which lubricates the moving parts. Pull the pull start firmly in order to start the engine. Important, do not pull the cord to the end of its run as it can break. If the mini moto does not start check the choke and the throttle cable.
Choke
The choke controls the amount of air that is allowed into the air/fuel mix. The choke is adjusted via a lever located on the side and back of the engine. The choke is off when the lever is down, and on when the lever is up. When you start the mini moto the choke should be on, when the mini moto is warm and ready to ride the choke needs to be off.
Carburetor
It is recommended that any adjustments to the carburetor are made by a professional. The carburetor pumps and mixes the fuel and air. The small diaphragms, orifices and ports mix the air and fuel very precisely, this process demands clean fresh fuel.
Jet
The jet can be adjusted by the screw located in the access hole to the right of the choke lever. The jet is adjusted by the manufacture however the conditions of where you wish to ride may be different, which means that you will need to make adjustments. Turning the screw clockwise will make the bike run with a leaner mixture, and counter clockwise will richen the mixture. Only adjust the screw 1 tern at a time and then test the mini moto, this is trail and error. Please note that it is best to find the optimum setting for performance and then run a slightly richer mixture as a mix that is too lean can seize the engine.
Digg
del.icio.us
Blink
Stumble
Spurl
Reddit
Netscape
Furl
Article keywords: mini moto, mini motos, mini moto dirt bikes, mini moto part, dirt bikes, mini moto wholesale
Article Source: http://www.articles2k.com
Matt Tong has been importing and riding Mini Motos for over two years. For more information please visit his mini moto site at www.minimotosandmore.com. Also check out the bigger versions at www.idealauto.co.uk!
|
|
| Top Motorcycles Articles |
|
|
- 2). What To Look For When Purchasing An ATV Tire By : Mike Barus
If you are in the market for purchasing tires for your all terrain vehicle (ATV), there are several factors for consideration. There are a great variety of tires on the market and it is quite easy to become overwhelmed at the sheer number of choices available from different brands. In order to find the best tires for your specific ATV that meets your needs, consider these three points:
1.
|
|
|
- 4). OEM or Aftermarket (Detailed Version) By : Maricon Williams
You may be needing of an OEM motorcycle part or may be not. Read on to know more.
OEM part is short for Original Equipment Manufacturer part. At first sight, it may be understood as originally manufactured per se. However, many motorcycle manufacturers do not really manufacture every motorcycle part of their bikes. They have some parts designed and manufactured by outside companies.
|
- 5). Complete Guide in Choosing Motorcycle Jackets By : Maricon Williams
Experts choose the best. As much as possible, we want to be choosing the way they do, right? Moreover, we have to know their standards and qualifications.
Choosing motorcycle jackets for one can be a taxing process if you do not know where to start and what areas to put special attention to. To expunge confusion from your weary head, here is a complete guide.
|
- 6). Choosing the Best Radar Detectors for Your Motorcycle By : Nicola Kennedy
Because of the legal/illegal status of radar detectors in the US market many different models with different functions from different brands have emerged onto the market.
Some of these radar detectors are the following:
• Radar Screamer. This unit provides immediate warning in order to get the attention of the driver. This enhances the audio warning which is produced by many radar detectors to allow the motorcycle rider to better hear the warning while at constant speed.
|
- 7). I want those TIRES By : Maricon Williams
Tires are important. In fact, your choice of tires can affect comfort, handling, safety and more.
There are two kinds of tire construction. The first is the bias-ply and the other is called the radial. Bias-ply construction is generally used by cruisers. On the other hand, radial construction is used by sport bikes. You can easily distinguish one construction from the other for bias-ply has round profile while radial has a flatter and shorter version.
|
|
|
|
|
- 10). Chopper Parts By : Jason Gluckman
Few road vehicles look as unique and stunning as Choppers. These customized bikes epitomize all things wild and creative in the bike world. In simple terms, a chopper is a bike, usually a Harley Davidson or Indian, which has several of its parts ‘chopped off’. This is done in order to make the vehicle lighter, easier to maneuver and more eye-catching.
|
| New Motorcycles Articles |
|
|
|
|
- 3). Repairing The Headlights On A Scooter By : Jason Uvios
A scooter with the safety feature of a headlight will require some amount of maintenance so you always have a fresh bright headlight. A headlight is generally sealed tight, so little or no water is going to enter the headlight fixture.
|
- 4). Choosing and Installing a Motorcycle Battery By : Christine Harrell
Although a motorcycle battery and other types of vehicle batteries are built for longevity, over time batteries will slow down and eventually wear out. This occurs when the sulfate that flows over the plates begins to build up a residue on the plates, slowly diminishing the conductivity.
|
- 5). Motorcycle Tires Q & A By : Maricon Williams
Here are few of the frequently asked questions about tires:
1. Why are new tires better?
First, new tires are better because it is organic and it decomposes. Second because the older the tire gets, the more it is exposed to outgassing. Outgassing makes the tire brittle.
2. What’s the right tire age?
In essence, the principle is the newer the tire the better.
|
- 6). Breaking the Habit By : Maricon Williams
We can greatly appreciate the enormous benefit of motorcycle brakes the moment we are faced with our most nerve-racking and supposed-to-be dreadful ride. This is the reason why we have to maintain it well.
We must be certain that it will not keep us hanging whenever we need it. It can turn out to be our last feasible resort – no second chances because what we can be battling in the situation is our loved one’s life or our very life.
|
- 7). When to Buy… By : Maricon Williams
This is a difficult question. But to boot, we are the ones who will decide when shopping for motorcycle parts. Thus, we must know how to choose cleverly. We have to do it after evaluating each of the possibilities available.
The rule of thumb though is: if you are looking for a replacement or improvement part, first you consider the availability of the motorcycle parts.
|
- 8). Motorcycle Jacket’s Comfort and Protection By : Maricon Williams
Well, they choose scientifically and practically. There must be comfort and protection not just style, same thing with motorcycle apparel such as jackets. They must also give both comfort and protection.
However, there are some areas that need special attention. Let us discuss them one by one.
1. Material. Motorcycle jackets may either be leather or non-leather.
|
- 9). Saddle Risks Away By : Maricon Williams
Motorcycle seat height is one of the concerns of riders. Thus, it must be chosen with important considerations. This is because of the fact that saddles greatly affect the rider’s driving and maneuvering skills.
Seat height is measured in inches. Together with the seat height, the manufacturing date and the bike model is also given in the specifications.
|
- 10). Donning Rider’s Insignia By : Maricon Williams
There are different styles and designs of helmets available in motorcycle stores these days. Colors range from classic solid colors to domineering neon and luminous colors to promote conspicuity. There are also replicas that look like ‘super bike champ wear’.
Street motorcycle accessories like helmet are matters of personal taste. In that case, aesthetic side is often chosen over anything else.
|
|
|
