|
Home / Computers / Hardware
Computer Consulting Business: Know about Vendor Hard Drive Replacement
By:Joshua Feinberg
Many of your computer consulting business clients will come from non-technical, business backgrounds. As a result, many will not immediately grasp why a failed hard drive cannot "simply" be replaced by a new or refurbished hard drive.
As part of managing clients expectations, it’s important to educate your clients on the steps that go into formatting a hard drive, loading the OS, configuring device drivers, loading software applications, customizing the OS and applications and restoring data.
Educate Your Client
As a computer consulting business owner, you know replacing a hard drive is not as simple as removing the shrink wrap and installing the device into the PC. But, many times, your clients don’t.
Or they just assume that all the OS files, device drivers and software applications will "magically" appear. This all may sound really basic, but taking a few minutes when discussing PC warranties with your clients to explain these issues.
How does the Vendor Handle Hard Drive Replacement?
You need to know how your preferred PC vendors handle hard drive replacement under warranty service. What kinds of labor are covered if a desktop PC or notebook hard drive needs replacement under the warranty?
Some vendors specify that the hard drive device needs to be just physically replaced and operational, and recognized by the PC hardware setup program. Under this form of warranty coverage, the technician’s job is done the moment the empty (blank) replacement hard drive is installed in your client’s PC.
The Real Cost
Unfortunately, as most PC vendors feel financial pressure to reduce their support and warranty costs, your computer consulting business clients probably will be subjected to a no-frills warranty service approach. Hard drives for desktop PCs are relatively inexpensive, around $100 to $200 at retail.
So it’s important for your clients to understand that warranty service on a hard drive replacement generally doesn’t cover the more substantial labor costs involved with restoring the hard drive and system to the pre-crash condition.
If your clients outsource this work to your computer consulting business, it easily could cost them $200 to $500 (or more) in labor to get that PC hard drive back to its pre-crash condition. Even if your clients’ internal gurus handle the work, this easily could pull these internal gurus away from their "real" jobs for a half-day or more.
The Bottom Line about the Computer Consulting Business
The expense of recovering a crashed desktop PC hard drive tends to be more concentrated on soft costs, which most times aren’t covered by the PC vendor’s warranty, therefore we see more and more reason not to recommend purchasing extended warranty coverage with entry-level desktop PCs.
Copyright MMI-MMVI, Computer Consulting Blog. All Worldwide Rights Reserved. {Attention Publishers: Live hyperlink in author resource box required for copyright compliance}
Digg
del.icio.us
Blink
Stumble
Spurl
Reddit
Netscape
Furl
Article keywords: computer consulting business, computer-consulting-business
Article Source: http://www.articles2k.com
Joshua Feinberg can help you get more steady, high-paying computer consulting clients. Sign-up now for Joshua's free audio training on proven computer consulting secrets from the Computer Consulting Blog now at www.ComputerConsultingBlog.com
|
|
| Top Hardware Articles |
- 1). Acer Aspire 3004WLCi - A Quick Review By : James Morris
I recently found myself in need of a new laptop. With a tight budget and moderate needs, I knew it wasn't going to be easy to find a product that would do what I wanted and still be in my price range.
As a Network Technician and a Web Designer, I needed a machine that would have enough storage to store all my software, projects for my clients, and still be able to handle an occasional temporary operating system backup from a client's machine.
|
- 2). A market study of colour printers By : John Sollars
The printer manufacturing market seems to be a booming one. Manufacturers are no doubt eyeing expansion and coming up with newer products to capture the burgeoning market. The manufacturers are interested in the colour -printer sector for purely reasons of expansion. There is stiff competition between the makers as all are concentrating to keep the prices low to capture the market.
|
- 3). Read This Before You Buy A Laptop. By : Robert Michael
Looking to buy a laptop? Congratulations! So, do you want a thin-and-light notebook, a mainstream notebook, an ultra portable notebook, or a business notebook? And do you want that in a Dell, a Gateway, an IBM, a Sony, or a Toshiba, to name just a few of your options?
Confused yet? It really can be overwhelming. But buying a laptop doesn’t have to mean learning a whole new language.
|
- 4). The Types Of Computer Memory By : Robert Thatcher
How can a computer be such an amazing gadget? To many people they just can’t be so amazed on how computers have changed the way we live. Computers can now be found in many sizes and shapes. Almost every home appliance seems to have their own mini computer located somewhere. From cars to buildings to almost every gadget there is, most of the time each one has a computer working to make them run and change the very way we live life.
|
- 5). Find your laptop drivers easily! By : Mohammad Abdullatif
Many people, especially beginners, struggle in finding drivers for their laptops. In this article, I will illustrate two ways to help you find your laptop drivers quickly, and easily.
The first method we will consider is to visit a company's website, and attempt to find a 'Drivers' or 'downloads' link. If a similar link is not immediately apparent, look for a search box.
|
- 6). Tips Before You Buy a Scanner By : James Hunt
When buying a scanner or printer, it is always a good idea to look for advice if you are not sure what you are looking for or what you need. All too often people...
|
- 7). Computer Consulting 101 PC Troubleshooting Advice By : Joshua Feinberg
While most small businesses really do need to find a good local computer consulting business to take care of their computer problems, there are some computer problems that are simple enough for even a technophobe to handle. At Computer Consulting 101, we've found there's one very simple piece of advice that often doesn't get communicated to non-technical small business end users: When in doubt, reboot first.
|
- 8). Building A Computer Introduction By : Chris Silop
If you are reading this article, you are probably wondernig, why and how do you build a computer. Building your own computer is more simple than you think and has many benefits.
Why Build A Computer?
Building a computer has many benefits over buying a premade. First of all, it is generally cheaper if you build your own than buying one. If you shop your components, your DIY(Do it yourself) computer will be cheaper than its premade equivalent.
|
- 9). History of Hewlett Packard and Ink By : John Sollars
Hewlett Packard’s tryst with ink took off when it acquired a company named F.L Mosley based in California in 1958. Mosley was manufacturing recorders and plotters for industrial applications such as continuous process monitoring systems, data loggers and the like in the 1950’s.
Hewlett Packard was the pioneer in imaging and printing technologies. It was the first in the market during the 1980’s to come up with inkjet and laser technology used in printers until date.
|
- 10). Laptop Accessories By : Dave Klein
Finally! You’ve managed to get that long-promised vacation. While enjoying the lazy sea breeze and coconut drinks at your tropical hideout, you decide to finish that closing report and mail it back to the home office, before really getting down to party. Luckily, you don’t have to depend on antiquated hotel computer systems. You clever man, you have your own computer laptop!
The advantages of having a laptop are very obvious.
|
| New Hardware Articles |
|
|
|
|
- 3). Computer Consultant Skills: Do You Have to Have 20 Certifications? By : Joshua Feinberg
I've had more than one person tell me, "Well, I’m a MCP or I’m a CNA and I’ve got this one cert but I’m working on like 15 more certs and as soon as I get my 19th cert, five years from now, I’ll be all set to be a computer consultant." That’s just a hunk of bologna. Know why?
Small Business Aren't Using Cutting-Edge Technology
Most small businesses don’t care how many certifications you have.
|
- 4). Xerox - Its Journey with Ink By : John Sollars
Chester Carlson inventor of xerography founded the Haloid Company on April 18, 1935. The company manufactured and sold photographic paper! It was based in Rochester New York.
In the year 1942 Carlson received U.S. patent No. 2,297,691 on Oct. 6 for electrophotography, later called xerography, the technology that revolutionized the world of imaging.
|
- 5). The History of Canon - From an Optical Lab to a Multimedia Giant! By : John Sollars
Canon, according to the dictionary means is a general law, rule, principle or criterion; church decree or law; member of cathedral chapter; body of writings accepted as genuine.
Now what I am talking about is a company that manufactures user-friendly products! Canon the camera making company that now gives varied other products and services to the world such as printers, inks and fax machines and copiers!
Canon’s Roots
Canon’s roots were laid in 1933 with very few employees as a precision optical instruments lab.
|
- 6). Four Power System Problems Common in Colocation Facilities By : RobertAIS
The primary factor that determines uptime for servers in a colocation facility is power. Power outages will knock a network offline and even damage hardware such as motherboards, memory, and hard drives. Despite how intrinsic power is to keeping businesses connected to their networks, only 2% to 3% of colocation facilities have the right power systems in place.
|
- 7). Epson Yesterday and Today By : John Sollars
Epson started as watch making company Seiko Epson Corporation, Japan. Epson was established in 1961 to manufacture precision parts for Seiko watches, back then it was called Shinsu Precision Manufacturing Company.
Epson’s first foray into the printing and imaging business was the Olympics of 1964 held in Tokyo. The company was awarded a contract to develop a precision timer for the Games.
|
- 8). Konica Minolta By : John Sollars
Konica Minolta, the name usually brings to mind their camera or their photographic materials. However, it is also one of the top players in the printing and ink manufacturing business. The lines below will take you through a brief history of the company and touch upon their all-new environment friendly polymerized toner.
Konica’s Humble Beginnings
Like all other big names in the printing business Konica Minolta too has roots way back in the past and forayed into the printing business due to the potential of printers and inks in the market.
|
- 9). Lexmark - Relatively new to the market but already on top! By : John Sollars
Lexmark does not have the advantage of the proverbial long history in its kitty of printing and imaging solutions like its competitors to bank on; however it has managed to make a mark on the imaging and printing industry. One of its important technologies is the Photo Cartridge and PrecisionSense Technology.
Its Brief Glorious History
Lexmark was established fairly recently in 1991 previously a printing and imaging division of technology giant IBM.
|
- 10). Computer Consulting: Use Your Time Wisely By : Joshua Feinberg
Time is money. If you're not careful in your computer consulting business, you'll waste both. With a little discipline and structure, you can maximize the return on your time.
Journal Your Time
One way to determine your computer consulting time is by journaling. Write down everything you do for a couple of weeks to determine what you do with your time, where the time wasters are, and what you could do to improve your time management.
|
|
|