|
Home / Cars and Trucks
Camshaft : A Go For Gold
By:James Monahan
Camshaft, in its simplest definition, are the lobes in an engine that operate the valves. It is driven by a crankshaft, either through a belt, gears or chains that run at one half the speed of its own. It also facilitates the opening and closing of these valves in all piston engines.
Getting a wrong camshaft is like wasting all your efforts on a dollar per dollar basis. Don’t just be blinded by other engine management that of the electronic kind. No other single modification can come up with the same quality of function a camshaft can provide when it comes to cost-wise efficiency, power and driveability.
So, you’re in for camshaft hunt? Here are some helpful tips you can take note of in getting a camshaft.
1. Camshaft for a resto or resto mod project
If you’re going to get a cam for a resto or resto mod project, try to focus on its factory specs and do restoration by figures. Most camshaft company dealers will provide you with catalogs and amazing tech lines to help you pick the best camshaft.
Information regarding recommendations for the changes that will fit the camshaft like high stall torque converter, larger carburetor or exhaust headers, peak torque and a usable power hand and other related concerns should be answered and provided for by the company.
2. Camshaft for Vintage Engines
Take pride in upscaling the power and efficiency of your vintage engine, while camshafts let you take advantage of more modern grinds that creates more torque and horsepower by repetitive open and close motion of the values faster within the same specified duration.
Ideally, not all 280 degree camshafts behave and perform in the same manner. The camshaft’s driveabililty and torque quality is directly related to the rate of opening and closing speed of the valve as well as its durability.
3. Limits and modification of camshafts
It is important to know the restored engines’ practical limit and its special modification which a camshaft can accommodate. Engines with advertised duration are usually at 260 to 270 degrees.
So, how is a camshaft’s duration measured? The method of measurement they use is at .050 inches of value lift. However, restored engines with 215 to 220 degrees camshaft duration don’t really work well, and often times evaluated to have sluggish or laid back performance.
4. The camshaft centerline
While tip #3 teaches you so much about limits, modification and camshaft duration, do not forget and try to overlook its centerline, or what other people refer to as lobe separation angle.
Performance wise, it is one vital part that adds plus points to the camshaft’s totality, to shape up a balanced combination of power and fuel efficiency. Standardized resto cams aim for 110 to 112 degree centerlines.
As for drag race cams, theirs is set on a 104 to 106 degree centerline, designed to produce a bit more on the mid-range torque, but would often times require a lot more other mods to begin with.
5. Camshaft Value Lift
As I’ve mentioned in tip #3, value lifts are the primary contributing factors to a camshaft’s duration.
But although value lifts is one camshaft spec to go look after, it sets physical limit in things like value-to-piston clearance and value spring retainer-to-value guide clearance and value spring coil bind issues.
In this field, camshaft experts says it is always a go for the gold to target .450 to .475 inches of maximum value lift, especially for a modern v8s. For best results, ask assistance from your cam manufacturers to know details regarding physical measures of these things with critical dimension.
6.Camshaft Grind
Who says only singers could sing? Hey, camshafts can do it too!
When you’re just about to come up with a cam grind, prepare to hear it sing. So how do you create a cam grind? By coating the cam from its bearing lobes and surfaces with quality assembly lube, you’re bringing it a successful break in period!
To hail with all the electronic devices that are designed for engine management – because camshaft is and will still make most of the shots. The camshaft’s timing specification is determined by the ideal parameters of peak horsepower, fuel mileage, peak torque, a usable power, magnifold vacuum.
Digg
del.icio.us
Blink
Stumble
Spurl
Reddit
Netscape
Furl
Article keywords: camshafts, engine, valves, crankshaft, pistons, belt, gears, chains
Article Source: http://www.articles2k.com
James Monahan is the owner and Senior Editor of
CamshaftSites.com and writes expert
articles about camshafts.
|
|
| Top Cars and Trucks Articles |
- 1). 2008 Chery QQ: Sneak Peak! By : Matthew C. Keegan
China’s Chery Automotive Group is getting set to import as many as five vehicles into the US starting in the summer of 2007. These 2008 models are reportedly going to be cheaper than competing models in their respective classes, undercutting some models by as much as $10,000 per car. I have been doing a little investigating and have learned more about the Chery QQ, the three door compact that will retail for just $6995.
|
- 2). Geely Cars: Gotta Get One? By : Matthew C. Keegan
I mentioned in a related article that the first batch of Chinese built cars to be imported to the U.S. is only a few years away. In that article, I discussed Chery Automobiles and how the company has its designs on the American market, particularly in the entry level category. Well, now a second manufacturer – Geely Automotive Company – is also planning on bringing at least one model to the U.
|
|
|
- 4). How To Avoid Auto Repair and Service Scams By : David Maillie
There’s a reason why auto service stations have one of the largest numbers of complaints with state attorney generals in every state. Some uphold good business practices and ethics, but most, unfortunately are all about profit and don’t care if they have to lie and cheat to get it.
|
- 5). Ford Focus Is 'Comfortable And Versatile' By : Kwik Fit
The UK's best selling car at the moment; the Ford Focus, is a comfortable and versatile mode of transport, according to the manufacturers, who claim the latest model is longer and wider than before.
With a variety of body shapes available in several trim levels, the Ford Focus costs from £11,395 on-the-road for the three-door 1.4 Studio model, to £19,200 for the 1.
|
- 6). 2006 Mitsubishi Raider: A Rebadged Delight! By : Matthew C. Keegan
If you were to examine the new Mitsubishi Raider, your eyes would behold the unmistakable triad logo centered in the middle of its beefy looking grille. However, as you let your eyes run the full length of the truck’s body and take a look at its styling cues, you would see something different, yet very familiar. Indeed, apart from some fascia, body, and cabin changes, the Raider is without a doubt a Dodge Dakota.
|
- 7). Fuel-Efficient Ford Cars: The New Trend By : Jason Moore
With gas prices soaring straight into oblivion, automobile customers and the rest of the auto market are looking for vehicles that would save their pockets from getting into trouble. Studies and research have found out that the numbers are showing that customers are leaning towards those vehicles that would assure them that they would not have to spend much on gas.
|
- 8). Jaguar X Type: The Classic Luxury Sports Car By : Jennifer Dylan
Built on a modified version of the Ford CD 132 platform, the Jaguar X Type is considered to be just another version of the Ford Mondeo. Take away the badge and the name from the Ford Mondeo and put in Jaguar badges, you would be getting the the Jaguar X Type. In fact the platform which it was built on was just a modified version of the Ford CDW 27 platform which is what the Ford Mondeo uses.
|
- 9). How to Create Your Own Vanity Plates By : Kevin Anderson
Vanity plates, for some people, are just an added expense, for in some states, they do charge people with vanity plates an annual fee for them. However, there are some people who would opt to have vanity plates so as to show off and tell people more about themselves. Aside from telling people what kind of person they are, vanity plates also serve as channels and media for people to shout out to the rest of the driving world some messages that they would like to get across.
|
- 10). 2006 Toyota Matrix: Value Meets Fun By : Matthew C. Keegan
During the early part of this decade Toyota was examining its vehicle line up and the decision was made to build a car to entice young people who were looking for something that was small, fun to drive, and affordable. While the Corolla served faithfully in this capacity, Toyota needed something that spoke excitement. The Corolla just wasn’t that kind of a car and something radically different was needed.
|
| New Cars and Trucks Articles |
|
|
|
|
|
|
- 4). Are Flex Fuel And Biodiesel Viable Options? By : Mike Eggert
Once thought of as only a dream, Flex fuel vehicles are fast becoming a reality. The high cost of gasoline and fuels like Diesel have prompted auto makers around the world to start building automobiles that will burn more than one type of fuel.
|
|
|
|
|
|
|
|
|
- 9). IRS Incentives for Hybrid Owners By : Michael Plante
The hybrid car has not come into the world without a shroud of rumors following carefully behind. From rumors of exploding batteries, electrical and digital nightmares, and poorly met expectations letting down consumers, the hybrid has had to struggle to overcome many misconceptions...
|
|
|
|
|
