|
Home / Science
Finite Element Analysis: Post-processing
By:Steve Roensch
The following four-article series was published in a newsletter of the American Society of Mechanical Engineers (ASME). It serves as an introduction to the recent analysis discipline known as the finite element method. The author is an engineering consultant and expert witness specializing in finite element analysis.
FINITE ELEMENT ANALYSIS: Post-processing
by Steve Roensch, President, Roensch & Associates
Last in a four-part series
After a finite element model has been prepared and checked, boundary conditions have been applied, and the model has been solved, it is time to investigate the results of the analysis. This activity is known as the post-processing phase of the finite element method.
Post-processing begins with a thorough check for problems that may have occurred during solution. Most solvers provide a log file, which should be searched for warnings or errors, and which will also provide a quantitative measure of how well-behaved the numerical procedures were during solution. Next, reaction loads at restrained nodes should be summed and examined as a "sanity check". Reaction loads that do not closely balance the applied load resultant for a linear static analysis should cast doubt on the validity of other results. Error norms such as strain energy density and stress deviation among adjacent elements might be looked at next, but for h-code analyses these quantities are best used to target subsequent adaptive remeshing.
Once the solution is verified to be free of numerical problems, the quantities of interest may be examined. Many display options are available, the choice of which depends on the mathematical form of the quantity as well as its physical meaning. For example, the displacement of a solid linear brick element's node is a 3-component spatial vector, and the model's overall displacement is often displayed by superposing the deformed shape over the undeformed shape. Dynamic viewing and animation capabilities aid greatly in obtaining an understanding of the deformation pattern. Stresses, being tensor quantities, currently lack a good single visualization technique, and thus derived stress quantities are extracted and displayed. Principal stress vectors may be displayed as color-coded arrows, indicating both direction and magnitude. The magnitude of principal stresses or of a scalar failure stress such as the Von Mises stress may be displayed on the model as colored bands. When this type of display is treated as a 3D object subjected to light sources, the resulting image is known as a shaded image stress plot. Displacement magnitude may also be displayed by colored bands, but this can lead to misinterpretation as a stress plot.
An area of post-processing that is rapidly gaining popularity is that of adaptive remeshing. Error norms such as strain energy density are used to remesh the model, placing a denser mesh in regions needing improvement and a coarser mesh in areas of overkill. Adaptivity requires an associative link between the model and the underlying CAD geometry, and works best if boundary conditions may be applied directly to the geometry, as well. Adaptive remeshing is a recent demonstration of the iterative nature of h-code analysis.
Optimization is another area enjoying recent advancement. Based on the values of various results, the model is modified automatically in an attempt to satisfy certain performance criteria and is solved again. The process iterates until some convergence criterion is met. In its scalar form, optimization modifies beam cross-sectional properties, thin shell thicknesses and/or material properties in an attempt to meet maximum stress constraints, maximum deflection constraints, and/or vibrational frequency constraints. Shape optimization is more complex, with the actual 3D model boundaries being modified. This is best accomplished by using the driving dimensions as optimization parameters, but mesh quality at each iteration can be a concern.
Another direction clearly visible in the finite element field is the integration of FEA packages with so-called "mechanism" packages, which analyze motion and forces of large-displacement multi-body systems. A long-term goal would be real-time computation and display of displacements and stresses in a multi-body system undergoing large displacement motion, with frictional effects and fluid flow taken into account when necessary. It is difficult to estimate the increase in computing power necessary to accomplish this feat, but 2 or 3 orders of magnitude is probably close. Algorithms to integrate these fields of analysis may be expected to follow the computing power increases.
In summary, the finite element method is a relatively recent discipline that has quickly become a mature method, especially for structural and thermal analysis. The costs of applying this technology to everyday design tasks have been dropping, while the capabilities delivered by the method expand constantly. With education in the technique and in the commercial software packages becoming more and more available, the question has moved from "Why apply FEA?" to "Why not?". The method is fully capable of delivering higher quality products in a shorter design cycle with a reduced chance of field failure, provided it is applied by a capable analyst. It is also a valid indication of thorough design practices, should an unexpected litigation crop up. The time is now for industry to make greater use of this and other analysis techniques.
copyright 2005 Roensch & Associates. All rights reserved.
Digg
del.icio.us
Blink
Stumble
Spurl
Reddit
Netscape
Furl
Article keywords: stress, stress analysis, law, legal, attorney, court, courtroom, fea, finite element, expert witness, engineer, product liability, personal injury, forensic
Article Source: http://www.articles2k.com
Steve Roensch is a mechanical engineer with more than 20 years experience. He has served as an expert witness across many industries. Learn more about mechanical engineer expert witness services at www.FiniteElement.com.
|
|
| Top Science Articles |
- 1). Chandrayan I By : dasan
It was on July 20, 1969 that "Eagle", the lunar module landed on the moon and American Astronaut Neil Armstrong took "that one small step" paving way for "a giant leap for mankind" .
In 2007-08, India will launch Chandrayan I, which will be closely followed by China's CHANGE-I. Indian Space Research Organization (ISRO) is spear-heading all the activities in the field.
|
- 2). Looking To The Past Of Geothermal Energy By : Rick Solare
Geothermal energy is often viewed as a relatively new form of alternative energy. In truth, the use of geothermal energy stretches far back into the past.
Looking To The Past Of Geothermal Energy
Geothermal energy is literally, “earth heat”. This type of energy's name comes from two Greek words: “geo” meaning earth, and “therme”, which means heat.
|
- 3). Alternative Fuel Source - An Urgent Need For One By : Ernest R. Peterson
Using alternative fuel sources is not just a matter of environmental responsibility. It is not just about assuaging your conscience. It is good sense, and sound planning. Although most of us are in denial, the fossil fuels which form the backbone of our world economy are dwindling quite rapidly, even as we go about our daily business in our cars. Although few Americans use an alternative fuel source to commute, those who do are soon going to be at an advantage.
|
- 4). The Wages of Science By : Sam Vaknin
In the United States, Congress approved, In February 2003, increases in the 2003 budgets of both the National Institutes of Health and National Science Foundation. America is not alone in - vainly - trying to compensate for imploding capital markets and risk-averse financiers.
In 1999, chancellor Gordon Brown inaugurated a $1.6 billion program of "upgrading British science" and commercializing its products.
|
- 5). Many Uses of Metal Detectors By : James Hunt
Have you ever lost something at the beach or at a park and wondered for weeks what happened to it? Chances are that someone was walking with the ingenious invention...
|
- 6). How the Meter Came To Be By : James Monahan
The meter follows a timeline dating back to the eighteenth century, when two approaches to the definition of the standard unit of length were broached.
|
- 7). How to Make a Thermometer By : James Hunt
A thermometer is an instrument that measures the temperature. Depending on what country you live in, temperature is measured either in a scale called Fahrenheit or Celsius...
|
- 8). The Fossil Record And Creation Science By : Greg Neyman
Young earth creationists commonly point to the fossil record in order to support their position. In one instance, the article "The Fossil Record: Becoming More Random All the Time" by John Woodmorappe, has some very good points to it (Footnote 1). Read it if you like, (its a long one), but you don't have to much farther than the abstract to see problems.
|
- 9). Weird Science – The Inner Workings Of The National Science Foundation By : Dave Klein
The National Science Foundation is an independent government agency in the United States. The National Science Foundation is responsible for providing support to basic science research, which is primarily accomplished through research funding.
The National Science Foundation mostly provides research funding in the form of grants. These grants are most often given in the form of individual grants to graduate students and professors.
|
- 10). Understanding the Scientific Method By : Professor Know
Understanding the scientific method and how to follow it is critical to building a good reputation in the technical community. In regards to science fairs, as a student progresses in grade levels the judges are going to demand more and more focus on using the scientific method.
Here is my seven step description of the scientific method.
1. Define the question 2.
|
| New Science Articles |
|
|
- 2). Amazing New Hubble Pics By : Anne Noonan
New Hubble pics - how exciting! The latest of the new Hubble pics is of a black hole, which they've captioned as being in need of a home.
To get these new Hubble pics a team of astronomers, all from Europe, combined the power of the Hubble Space Telescope with that of the VLT (Very Large Telescope at the European Southern Observatory (ESO) in Cerro Paranal.
|
- 3). How To Get The Most From Direct TV By : dave4
More and more, savvy consumers are choosing Direct TV over traditional cable. In fact, Direct TV is now the leading cable television provider in the United States and the largest satellite TV company in the entire world. Why are so many people choosing Direct TV over regular cable television For starters, Direct TV offers access to hundreds of channels, bringing a plethora of programming into private homes, apartments, condominiums, commercial properties, airports, bars, and restaurants, as well as numerous other locations.
|
- 4). Direct TV Total Choice Premier By : dave4
The Total Choice Premier Channel Package from DIRECTV includes practically every channel offered in the United States for a great price. You get all the sports channels, movie channels, news channels, shopping channels and tons of specialty and informational programming like “The Learning Channel” and “The Food Network.” You even get your local channels so you can see local news and local programming.
|
- 5). Is Dish TV a Valuable Alternative By : dave4
Are features offered by Dish TV making its Satellite TV service a valuable alternative? With interactive tools, guides, and myriad options made available to every subscriber, the offerings made by Dish TV cannot be surpassed. Moreover, the affordability of Dish TV’s services seems almost criminal when one considers all of the incredible options made available to them with Dish TV’s amazing features! In fact, it is no surprise that Dish TV has been deemed the number one Satellite TV company in terms of customer service by J.
|
- 6). What Is A Fossil? By : Claudia Mann
What is a fossil? While this is a simple question, the answer can be simple or a bit more complicated.
The short and sweet answer to that question is “A fossil is the remains or evidence of any creature or plant that lived on the earth in a past geologic age.”
But there are so many KINDS of fossils. A more important question for a curious student is “What kinds of fossils are there?” The answer to that question will take a bit more exploration.
|
- 7). Is Solar Power The Immediate Answer To Our Energy Woes ? By : L.Beauley
We are looking for an across-the-board solution for our present exorbitant consumption of gasoline and it seems as though there is none, at least for the present. We are looking at Ethanol additive to our present gasoline formulas, but this will only give us better miles per gallon and of course, much cleaner bi-products with its use. Ethanol becomes a temporary
fix.
|
- 8). The Energy Waste Dilemma By : L.Beauley
Date: 04-23-06
With the price of gasoline on the upswing(again, April 20, 06), there seems to be little sign that we Americans are at least trying to conserve fuel, though there are pockets of concerned groups that are making their voice heard, mainly against Oil Company price gouging. At the same time the automotive advertising media seems to be pushing the higher gas consumption Suv's and cars.
|
- 9). Energy Conservation By : L.Beauley
The Role We Can Each Play =========================
We can all play a part in lessening our reliance on fossil fuels.
A- Use low-energy lamps such as CFL replacements for as many incandescent lightbulbs as possible in our home or apartment.
B- Turn off all lamps in areas where they are not needed.
C- Turn down water heater temperature to between 120-125 degrees.
|
- 10). Talk About "Hidden" Costs...Technically Speaking By : L.Beauley
7:47 PM 4/24/2006
Author: Lucien Beauley
Lighting Facts...I Wanna Know !
Each one of us, at one time or another has either driven or been a passenger in an automobile and experienced our traffic control lighting system. Originally unique, but now part of a global system.
Situated at every fully functional traffic light intersection is at least one "Red" light which is timed to turn on and off regularly to "Stop" traffic.
|
|
|
