How To Use Diamond Tool To Cut Steel In Micro Machining?

By:cyberryo

The diamond tool is commonly used in micro-machining as it can withstand the micro hardening of the workpiece surface during micro-machining. This micro-hardening creates enough resistance to break the tool bit easily in micro milling, but not a diamond tool. Micro-machining using diamond tool could be performed at high speeds and generally fine speeds to produce good surface finish such as mirror surfaces and high dimensional accuracy in non-ferrous alloys and abrasive non-metallic materials.

However, if a diamond tool were to be used to cut steel, one of the most common engineering materials used in industries, the diamond tool will face severe tool wear. While diamond only softens at 1350 degree Celsius and melts at 3027 degree Celsius, and is also the hardest material in the world, it has a weakness. Diamond succumbs to graphitization, which means that it will change its crystal structure to graphite crystal structure at 200 degree Celsius in the presence of a catalyst metal such as carbon steel and alloys with titanium, nickel and cobalt.

There have been various attempts to improve the tool life of the diamond tool while cutting steel so as to improve the efficiency and profitability of this operation. Such processes include micro-cutting the steel workpiece in a carbon-rich gas chamber as well as a cryongenically cooled chamber. However, these methods require costly equipment modification and restrict direct supervision of the micro-cutting process.

The latest breakthrough came when the diamond tool was subject to ultrasonic vibration during micro-cutting. It has been shown that a diamond tool subject to ultrasonic vibration can cut the steel well enough to produce a mirror surface finish with acceptable tool life. The ultrasonic vibration at the diamond tool tip allows the tool face to cool down considerably during the cutting process and delays the chemical reaction between the diamond tool and the steel workpiece. As a result, the diamond tool life is increased by a few hundred times.

For example, a single crystal diamond tool with feedrate 5 micron/revolution, cutting speed zero to 5m/min and depth of cut 10 micron was attached to a ultrasonic vibration generator so that the diamond tool tip vibrated about 4 microns while it was used to cut stainless steel. The mirror surface finish of the cut steel surface was measured at 8 nm Ra!

With more and more machining companies moving into the niche micro machining field, such ultrasonic vibration assisted cutting can only help the progressive company to achieve process leadership and innovative differentiation.

Digg del.icio.us Blink Stumble Spurl Reddit Netscape Furl

Article keywords: tool, diamond, diamond tool, steel, cut, ultrasonic vibration, surface, vibration, ultrasonic, cut steel, precision, cutting, surface finish, process, machining

Article Source: http://www.articles2k.com

Author Ken Yap is a director of Suwa Precision Engineering Pte Ltd in Singapore and represents metal stamping, precision machining, miniature precision balls and printed circuit boards manufacturers from Suwa, also called "The Oriental Switzerland" in Japan due to its Swiss resemblance for rich watch-making industry, its mountainous terrain and its precision component making industry. He is also a director of SV Tech which sources for printed circuit boards and IC chips from China.

Top Education Articles
1). Passing Cisco's CCNA And CCNP Exams: Ping And Extended Ping By : Chris Bryant, CCIE #12933 Passing Cisco's CCNA And CCNP Exams: Ping And Extended Ping
2). Goku & Friends: The Invasion of Dragon Ball Z By : Dave Carter Dragon Ball Z is an anime show that has gone from cult following to smash sensation in the United States. What started out as a cult following among high school and college students has spread to enjoy a more mainstream popularity among these younger groups, while continuing to expand through other demographics. A Japanese creation, this show in many ways opened the door for others to follow.
3). Intonation In English: Nouns And Adjectives Are Stressed Differently Than Verbs By : Frank Gerace Listen and Learn: Nouns and Adjectives one way; Verbs another Chinese has "tones" but all languages have their own special intonation. The "music" of a language is its intonation and it is perhaps the most important element of a correct accent. A "ggod" accent is not only a question of good pronunciation. Many people think that pronunciation is what makes up an accent.
4). V3 Screen Printing By : Mike Pedretti Everywhere around logos, designs and art shows up and comes out of the woodwork using a modernized version of an older technology. Screen printing is a helpful way to expose a company name and/or logo to the public. Screen printing originally started out using silk as a medium but has since moved on to using stretched porous, finely woven nylon or polyester fabrics, with carefully stenciled designs, and delightful creations take form and come to life.
5). The Challenges of teaching math today By : Robert D. During my years of teaching I’ve been wondering what to do to improve math education. My own teaching philosophy is simple, but throughout the years it has proven to be effective. While the groups I have taught have been diverse, there are certain consistencies in their responses, particularly, students appreciate a clear and sound explanation of a difficult concept, and experience the greatest growth when they have the chance to express themselves by asking any questions they might have and feel comfortable in class.
6). How To Teach Art And Drama In Schools By : Simon Oliver Let’s face it, arts and drama are considered extra-curricular activities when we think of what we expect to learn in school. In fact, arts and drama usually fall in line with extra-curricular activities, which are deemed by most as not as important as learning science, English or math. The indifference to arts and drama may have been brought about by the super high technology lifestyles that we lead.
7). Importance of Reading By : Tyler Benson What is the best way to spend free time? There can be so many different answers to this question. That depends on the preferences of a person. If you are lively and active, you may spend time outdoors or doing sports, if you are sociable, you may enjoy holding a party and communicating with various interesting celebrities. Some of us get so tired of the noise than wait till a nice evening to tackle in and read a nice book to relax or to learn something new or to get to the new world of wonders and travel in it, forgetting about the reality.
8). Online degrees - specially suited to adults looking to improve their employment prospects By : Ventura No longer is a university degree only available by physically attending university lectures, seminars and tutorials. Now you can work for your degree 100% online, never setting foot into the hallowed halls of learning unless you choose to. There are universities that offer Bachelors and Masters degrees online. You can even get a Doctorate 100% online.
9). Panj-aab: My brethren please listen to us. By : Dinesh singh Where water (aab) is means name, language, land, arts and culture. There water makes merry go, that land is called Punjab. The land of five sisters 1. Beas (ancient name Vipasha) 2. Chenab(ancient name Askini,) 3. Jhelam (ancient name Vitasta) 4. Ravi (ancient name Irawati,) 5. satluj (ancient name Shatadru) All these five sisters take birth in high and hygiene Himalayas, and then play in open fields of Punjab, making this land of warriors full of joys.
10). These complicated graduate studies. By : Chris Wells For every student, whether he is an undergraduate or graduate it is imperative, almost indispensable to turn to the help of other persons, to use their knowledge, skills and experience. Certainly, if you are working on your dissertation, it might be advisable to do the same. This dissertation help program should comprise several elements. The first element is the organizing of your dissertation.

New Education Articles
1). Great Tips on Getting Your Kids to Read By : Lisa James Getting your kids to read is often a daunting task, put the odds in your favor by following these tips.
2). Building Up Your Vocabulary In A Foreign Language By : Michael Gabrikow Find out how to build up your vocabulary in a foreign language from this article. Several techniques that will help you boost your vocabulary are covered as well as some interesting tips and tricks on this subject being given out in the text below.
3). How To Memorize Words By : Michael Gabrikow The following article will try to present some of these methods that could help you learn how to memorize words faster when learning a foreign language.
4). Increase the Value of Your Learning Easily By : Jean Morgan To aid in the lifelong process of learning, you will want to know and understand the differences between adult learning styles.
5). Getting Into Graduate School By : Lisa Parmley The GRE General Test is the most widely accepted college admission exam for graduate school. This test strives to measure the knowledge that test takers have gained over long periods of time (like through their undergraduate programs).
6). The Challenges of teaching math today By : Robert D. During my years of teaching I’ve been wondering what to do to improve math education. My own teaching philosophy is simple, but throughout the years it has proven to be effective. While the groups I have taught have been diverse, there are certain consistencies in their responses, particularly, students appreciate a clear and sound explanation of a difficult concept, and experience the greatest growth when they have the chance to express themselves by asking any questions they might have and feel comfortable in class.
7). The History of Crossword Puzzles By : Fran Black The first book of crosswords was published in 1924. It became a best-seller and crosswords replaced mahjongg as the most popular American game. Crossword puzzle design and solving is an excellent way to sharpen focus. Regardless of whether design and or solve numerous crossword puzzles, you will learn one more way to enhance memory and creative expression.
8). Dragons Through History By : Fran Black The Dragon has played an important part in myths and religions since pre-historic times. The history of dragons goes back at least six thousand years, and there are dragon tales and legends from every continent except Antarctica. In almost every culture, and all throughout history, there are stories of these mythical and magical creatures called dragons.
9). Forcible Rape Defense; False Accusations in Relationship and Date Rape Cases By : William F. Nimmo Forcible rape and attempted forcible rape between people who know each other, either casually or well, make up a sizeable percentage of the false accusations in the criminal justice system. The cry of rape or abuse is a familiar cry when a relationship goes sour or when a woman has second thoughts after a night of sex or near intimacy. While there are certainly legitimate claims of rape and attempted rape in the world, from the defendant’s perspective there are good reasons to view each claim with skepticism.
10). Criminal Defense Lawyers: Reducing Murder to Manslaughter By : William F. Nimmo Reducing murder to manslaughter is a task that presents itself in many murder cases. Depending on your state or jurisdiction you may be able to reduce murder to manslaughter by eliminating the element of “malice.” Classically, this is where the defendant acts by being provoked into a sudden quarrel or into a state of mind known as the “heat of passion.