Why I Do My Woodworking Using Hand Tools

By:Douglas Taylor

Most people know little about woodworking using hand tools. This may be completely new to you if you are a modern day woodworker.Some woodworkers avoid old tools at all costs. They think that they are outdated, less accurate and slower than the modern day machines. This simply is not true in most cases. This article will provide you with some facts about using planes and saws in your every day wood working projects.

Hand tools are safer. This is a major reason to consider using them. Woodworking machines with their sharp blades move pretty fast. You can have an accident and lose a finger or hand before you know what happened. You can be as careful as you can be but it only takes one small slip and you are off to the hospital or worse. Working by hand can get you hurt but the injury is normally not as severe. When you are operating the tool you usually have more reaction time to stop before it gets out of hand.

You can use a smaller work area. Table saws and planers take up a lot of room. It physically takes more space to operate your home shop with machines. Starting out by hand you can start in the corner of your garage and be just fine.

Hand tools are in some cases faster than machines. You may find that hard to believe but sometimes it is a lot faster. Sure if you are cutting out one thousand boards for a wood factory you cannot touch that by hand. However for the guy at home doing one single project by the time you set up your machine, adjust the fence and make a test cut you will be done and going on to the next step by using old fashioned tools.

It costs less to get started woodworking. Starting out with woodworking machines that are of any quality cost a lot of money. Even though you can spend plenty on high quality planes and saws the fact is you can start with a few tools and get your project done without breaking the bank.

Hand tools make less noise. This is one reason I choose to use to use these tools. There is something to be said about planning a board and hearing the blade smoothing the wood.

Achieve greater precision. Early on when using my table saw it was very easy to cut a little too much off my project. I have thrown away many a good-looking piece of wood because of some small mistake. When I use my hand saw it is much easier to sneak up on my mark and not overdo it.

I choose to use work by hand as much as I can. For myself it is a more sensible way to work with wood. The best system for most would be some sort of combination of the old and the new. Woodworking using hand tools is hard work. The rewards are worth it for me.

Digg del.icio.us Blink Stumble Spurl Reddit Netscape Furl

Article keywords: woodworking, general woodworking tools, tools, woodworking tools, woodworking using hand tools

Article Source: http://www.articles2k.com

For more tips about woodworking shop tools try visiting woodworking shop tools where you will find tips, advice and resources about topics all about woodworking

Top Hobbies Articles
1). Are you addicted to scrapbooking? By : Rita Hutner Many who suddenly get the scrapbooking bug say they started when they realized that so few pictures were taken of them as cute little tykes - and they want to make things better for their own children. What ever the reason, scrapbooking has become a big business. There are estimates that over 4 million people, almost all of them women, gather for "crop-alongs" or "power layouts" every month! All these people are on the lookout for new and exciting scrapbooking ideas and share their thoughts and techniques on how to create that perfect keepsake.
2). Orchid Care - Phaleanopsis Orchids By : Yale Bernstein --An introduction to Phalaenopsis orchids. Phalaenopsis orchids are one of the easiest orchids to grow in the home. The name "phalaenopsis" comes from the Greek phalaina, meaning "moth" and opsis, meaning "like". For this reason this orchid goes by the nick name "Moth Orchid". These orchids are very easy to grow and flower as long as care is given to recreate their natural growing environment as much as possible.
3). Doyles Room Spokesman Wins Cardplayer Magazine Lifetime Achievement Award By : Sage Kalmus He's been called the Godfather of Poker. He's the Texas Dolly. He's won more tournaments than this writer has years to his name. He's written the seminal book on Texas Hold'em strategy. He's the spokesman of Doyles Room, one of the internet's most popular online poker rooms. His name is Doyle Brunson. And as of February 15, 2006, he's got another claim to fame.
4). History of Candle Making By : Coffee Man Who invented the candle? Candles were invented independently in many countries. The Egyptians and Cretans made candles from beeswax, about 3000 BC. In the fourth century BC there were clay candle holders in Egypt. Qui Shi Huang (259 - 210 BC) was the first Emperor of the Qin Dynasty (221 - 206 BC). His mausoleum was rediscovered in the 1990s 22 miles east of Xi'an in China and contained candles made from whale fat.
5). Which pool table? By : Jeff King There are a few things to consider when purchasing a pool table that have an effect on the price and quality of your table and therefore, your game. Note that the term �pool tables� refers to the table used to play billiards, snooker, and all other cue-sports similar to this. The differences between these games are the rules and sets of balls used, not the table itself.
6). Genealogy as a Hobby to Trace the Roots and History of Family By : James Hunt Genealogy is becoming more popular as a hobby for those people that are interested in tracing the roots and history of their family. It may start with looking at a few old photos of unknown family members standing at an unknown landmark...
7). Challenge Coin Display Cases And Challenge Coins Tips By : Paton Jackson I find it amazing that the interest and popularity of challenge coins and challenge coin displays keeps rising. I get many questions about military challenge coins so I have decided to gather some valuable tips for you. The most popular challenge coins are navy challenge coins, marine corps challenge coins, army challenge coins, air force challenge coins and police challenge coins.
8). The Lincoln Cent � Part 3 � The Many Changes By : Keith Scott No real changes occurred in the cent from 1918 through 1942. In 1943, the cent would again see a dramatic change although not to its design, but rather due to shortages of copper caused by the war. At the time of World War II, the one-cent coin was composed of 95 percent copper and 5 percent zinc. These metals were denied to the Mint for the duration of the war, making it necessary for the Mint to seek a substitute material.
9). Skydive To The End By : James Monahan A skydiver usually travels at the speed of 12,000 feet or 4000 meters altitude and free falling from the sky.
10). Live or Fake Bait? By : Ty Wagner Choosing fake bait over live bait and how the two can get better results in different conditions.

New Hobbies Articles
1). Why The Hobby Of Model Building Continues To Be Popular By : Gregg Hall The hobby of building models has been a fun activity for fathers and sons for years. The popularity continues to expand today, and there are more variations of models to build than ever before.
2). Perfect Timing for Shooting By : Mitch Johnson "Leading" or shooting ahead of moving game is usually thought of in connection with shotguns and wing shooting, but it is sometimes important with the rifle while shooting deer. Learn some tips on the timing for shooting.
3). What you need to know To Avoid Hunting Human Beings By : Mitch Johnson In some occasion there is accident which happened unintentionally, which caused the live of others human being. But it can be prevented. In this article you will find some direction on how to prevent this accident.
4). Effective Times to Hunt Deer By : Mitch Johnson One of the things, which a hunter must realize when he go for hunting, is that he must respect some restriction given by the land owner where he hunt the deer.
5). Tips on How to Get the Best Shot on Target By : Mitch Johnson Sometimes the hunter is too hurrying to give a shoot which caused him missing his target. What is the best thing for him to do to get the right shot on the target?
6). Things to Remember When Shooting From Vehicles By : Mitch Johnson What has been experience hunting on vehicles? Have you been able to sight deer from the vehicles better or by approaching them walking?
7). What You Can Do With Your Hunted Deer By : Mitch Johnson Hunting the deer nowadays has become a commercial business, where people are hunting the deer to be sold.
8). Karaoke Machine Buying Guide By : John Morris The word karaoke, often mispronounced with a long e at the end instead of a short one, originated from a Japanese word meaning empty orchestra...
9). How To Lose Distance By : Robert Partain This article contains tips on what not to do if you want to improve your distance in golf.
10). How to Avoid Shooting Human Beings By : Mitch Johnson How do we prevent shooting other hunters or being shot? Sometimes in a forest or woods area, it is quite impossible to see where the others hunters are located.

� 2006 articles2k.com - Privacy Policy