Manufacturing Articles

1). Why Does The Tool Bit Break Easily In Micro Milling? By : cyberryo
Micro milling is one of the three common micro cutting techniques used in micro machining. In micro milling, the tool bit with diameter as small as 0.1mm is held in a high speed spindle rotating at 20,000 to 150,000 rpm, and used to mill steel, brass and aluminum with depth of cut at about 30 microns and feed rates of 120mm/m to 240mm/m to provide surface quality finishes as good as 0.
Article Related to: micro milling, micro machining, tool, micro, tool bit, milling, machining, precision, precision machining, suwa, engineering, manufacturing, japan, miniature

2). What Is Lean Six Sigma By : Peter Peterka
What Is Lean Six Sigma
Article Related to: lean, quality, improvements, manufacturing, disciplined, defects, service, speed, improving, elimination

3). Design For Six Sigma By : Peter Peterka
Design for Six Sigma (DFSS) is the application of Six Sigma principles to the design of products and their manufacturing and support processes. Whereas Six Sigma by definition focuses on the production phase of a product, DFSS focuses on research, design, and development phases. DFSS combines many of the tools that are used to improve existing products or services and integrates the voice of the customer and simulation methods to predict new process and product performance.
Article Related to: design, six, sigma, principles, manufacturing, product, research, improve, customer, dmaic, dfss, organizations

4). Applying Lean Six Sigma To Service By : Peter Peterka
Applying Lean Six Sigma To Service
Article Related to: manufacturing, industries, service, improvement, benefits, reduce, greater, effectively, critical, perform

5). Removable adhesive avoids label face stains By : Sylwia
A general-purpose removable adhesive that will perform on a wide range of face materials has been developed by Avery Dennison. Removability is an often-specified feature in a self-adhesive labelstock, but it can mean low adhesion levels, difficult conversion, label pre-dispensing, and even staining on the label face. Fasson R5000 is an emulsion acrylic adhesive – a formulation which gives good, clean, die cutting and reel-to-reel conversion speeds up to 140.
Article Related to: self-adhesive labels, labelling, manufacturing

6). What does an audio engineer do when mastering music? By : Jason Cole
So you’re a musician that just recorded your first album. You probably went into a recording studio and played all of your parts a couple of times, with the audio engineer handling all of the technical stuff. As far as you know, they should be able to take all the parts they recorded, burn it to a disc, and then it should be ready to press. While this isn’t completely wrong, most professional musicians take their mixed down recording and pass it off to someone else for mastering.
Article Related to: cd mastering, audio, digital, album, dvd, music mastering, analog, master, audio engineer, professional mastering, recording, disc, dvd duplication, manufacturing, large runs, cd duplication services

7). Let a Label Printer Help Increase Your Sales By : Sylwia
There are a number of good reasons to seek out quality labels for your products. It may simply be a matter of necessity. In other situations, compliance labeling is too important to neglect. One of the best reasons to find a good label printer for your products, however, is slightly more inviting than others. A label printer can help you increase sales.
Article Related to: label printer, labelling, sales, manufacturing

8). Can’t I just do my CD and DVD duplication at home? By : Jason Cole
You’ve just created an mp3 audio album that you want to make CD copies of, or maybe you have a collection of home video clips you’d like to burn to DVD and pass out to your friends. As far as you know home CD album duplication and DVD duplication require just a couple of things; a computer with a burner, CD-Rs and/or DVD-Rs, and the proper software.
Article Related to: cd duplication, dvd duplication, manufacturing, large runs, cd duplication services, cd labels blank, dvdr manufacturing, buy blank cds, cd mastering, digital business card, tshirts, tshirt, shirts, poster, audio, musicians

9). What is a Red Book standard audio CD? By : Jason Cole
When reading through the terms and conditions at your favorite CD and DVD duplication facility’s website, you come across a term you aren’t familiar with. “All CD duplication projects are done on Red Book standard audio media”. What is the Red Book of audio, what are the media standards it has set, and why is it so important? The Red Book is one of the nine Rainbow Books, which provide universally agreed on specifications for all types of media.
Article Related to: cd duplication, dvd duplication, manufacturing, large runs, cd duplication services, cd labels blank, dvdr manufacturing, buy blank cds, cd mastering, digital business card, tshirts, tshirt, shirts

10). Tactile warning triangles for screen clean By : Sylwia
Highly decorative self-adhesive labels – featuring a tactile warning triangle – have been produced by Sessions of York in the UK for the launch of Decosol’s Tip’n’Measure Screen Clean. The labels are printed in eight colours with a gold lacquer onto a silver metallised label stock. The Tip’n’Measure bottle has just won a silver star in the Star Pack Awards.
Article Related to: self-adhesive labels, tactile warning labels, bottle label applicator, manufacturing, printing

11). Verifiers first to meet new standards By : Sylwia
PSC’s bar code verification equipment is claimed the first in the world to conform with the newly established European CEN and ISO bar code quality standards. The certification ensures that PSC’s equipment has been manufactured, calibrated and tested to conform with the specifications found in both the CEN ENV12647 standard as well as the current ISO 15426 standard.
Article Related to: barcode verifiers, verification, manufacturing, printing

12). How To Machine Magnesium? By : cyberryo
Magnesium has been used in manufacturing notebook computer frames, video cameras, digital cameras, PDAs and other consumer electronics products because of its high strength to weight ratio. When magnesium is alloyed with aluminum, the resultant material is very light and strong, and easily machinable. The main concern in machining magnesium alloy is the danger of fire ignition when dry cutting.
Article Related to: magnesium, machining, magnesium machining, machining magnesium, precision machining, precision, cnc machining, suwa, engineering, component, manufacturing, japan

13). Pasta with Etiquette By : Sylwia
Etiquette Labels Ltd has won the contract to supply pre-printed direct thermal labels for May Tree Foods’ new range of pasta-based ready meals – Pasta Plus. Wrexham, UK-based Etiquette has also installed a label printing system to enable May Tree to produce barcoded information for insertion on the pre-printed labels. A keypad printer enables the operator to tap in the relevant information, which is then transferred on to the space provided on the pre-printed label.
Article Related to: thermal labels, label printing, manufacturing, barcode

14). Label Printers Offer Full Color Solutions By : Sylwia
Labels do not have to black and white bores. In fact, label printers can produce amazing color labels that can increase consumer attention and sales. Some industry pros maintain that a color label is about fifty percent more effective than a black and white option with respect to attracting a consumer‘s eye. Anyone using labels on a retail product should certainly consider using the full color solutions offered by label printers.
Article Related to: label printers, labelling solutions, manufacturing, color labels

15). Label Printing Experts Deliver Specialty Products By : Sylwia
If one needs little more than the occasional simple address label, they may be able to get by using their desktop PC, a decent printer and some store-bought label stock. Those who want something special, on the other hand, should look for a quality label printing company. Label printing firms can create specialty products to meet virtually any need.
Article Related to: label printing, label printer, labelling, manufacturing, labels

16). Oil resistant adhesive By : Sylwia
The presence of oil on a surface presents considerable problems when attempting to apply self-adhesive labels or nameplates. A new adhesive is said to overcome this problem – and in the process save money by reducing or eliminating the need for pre-cleaning the surface. The 300 LSE series adhesive also bonds well to traditionally difficult low energy surfaces including plastic, polythene, powder coating and corroded surfaces.
Article Related to: self-adhesive labels, labels, printing, manufacturing

17). Manufacturing Your Invention By : Lisa Parmley
Unless you’re able to license your invention right away, you will need to seek out invention manufacturing services. It is possible that even if you do license your invention, you will still be responsible for finding an adequate manufacturer.
Article Related to: inventor, invention, manufacturing

18). Flexible Strength Found in Fiberglass By : James Monahan
What’s common about a car window, a glass panel, solar cells, a basket ball backboard and an F-15 fighter jet cockpit?
Article Related to: fiberglass, composite, manufacturing, filament, fiber, marble remelt

19). Factors Influencing Label Printer Pricing By : Sylwia
If you are in the market to hire a professional label printer, you have probably noticed that prices can vary a great deal among the various printers. Why will one label printer charge more than another? What influences the prices offered by a label printer? Let us look at a few factors influencing label printer prices. Material Quality In some cases, the price asked by a label printer will reflect the quality of materials used.
Article Related to: label printer, label, printers, manufacturing

20). Leaflet-Label development By : Sylwia
A label company is investing in new technology to increase production of leaflet-labels. This investment programme, will increase production speeds, ensuring higher volumes are produced more cost effectively. A new fully integrated printing press will now produce both the label and leaflet in-line. The press incorporates a special die-cut facility which will offer a wide range of previously unavailable leaflet-label shapes including circular formats.
Article Related to: label printing, labels, manufacturing

21). Six Sigma Jobs By : Peter Peterka
The demand for people with Six Sigma expertise is constantly increasing. More and more organizations are discovering the many ways that the Six Sigma methodology can help them grow and improve. As Six Sigma spreads to many different industries beyond its genesis in manufacturing, you can now find many service and government organizations advertising for Six Sigma help.
Article Related to: six, sigma, jobs, organizations, industries, manufacturing, companies, consultants, staff, professionals

22). How to Define a Business By : Joseph Kenny
Businesses are everywhere. They are the units that perform most of the economic activity in our economy. Most businesses exist to generate a profit. There are some businesses that exist to perform a function other than profit, such as cooperatives and non-profit organisations. The traditional definition of a business is an entity that brings together time, effort and capital in order to produce a profit.
Article Related to: business, manufacturing, financial, banks, transport, utilities, money, profit

23). Going Into Trade By : James Monahan
There are hundreds of things that you should consider before deciding to pursue the trade project that you are aiming for.
Article Related to: trade, capital, business, manufacturing, home-based, partner, manpower

24). Fix-a-Form goes east By : Sylwia
Fix-a-Form International, the licensor of the multi-page label system, has signed a new licensee agreement to cover Poland in Eastern Europe. The new agreement is the latest licensee signing for the company that produces Fix-a-Forms in 23 countries. IWACO, the company’s Scandinavian licensee, will manufacture the Fix-a-Forms for exclusive distribution to Poland.
Article Related to: label system, self-adhesive labels, labelling equipment, manufacturing

25). Textile removable adhesive By : Sylwia
A company has added a new textile removable option to its permanent, removable option to its permanent, removable and speciality adhesives already available within its Taktik range of self-adhesive sheets. Designed to adhere to, and remove safely from, a wide variety of textiles, the transparent acrylic adhesive ensures clean removability without staining or marketing the surface of the fabric, says the company.
Article Related to: removable adhesive, permanent adhesive labels, labelling, printing, manufacturing